Our Products

5882 - New Portable Universal UV Coater

Serial:

Model:

Year: New

SKU: 5882

Description:
New Universal UV Coater


Features:





● Designed for maximum web width up to 57” (1448mm)
● Maximum speed = 1,200 ft/min. (370m/min.)
● Top Side or Bottom Side Coating of the Web
● Portable or fixed Design
● On Demand Quick Change Coating Cylinder
● On Demand Quick Change Plate Cylinder
● Plate cylinder preset for each cutoff
● Impression cylinder preset for each cutoff
● Each Cylinder is independently driven
● ON/OFF –Auto Impression
● Individual Motorized Side To Side Running Impression Adjustment
● Impression Adjustments via Touch screen
● HMI Touch screen Panel Controls
● Integrated Web Break Detector and Severing Device
● Custom "UMD" Universal Machine Docking Station
● Manual Side Lay Control of Entire Coater
● Integrated DMR Registration Cut Off Control
● Castor Wheel Design with Levelers For Safe Movability
● Integrated high intensity 2 UV Lamps Section
● Two Chill Rolls Tower Section with Variable Speed Independent Drive
● Support Structure for UV lamps and Required “Flow Out” Web Path
● Tresu "UniPrint” Closed Chamber Coating Supply System
● Tresu “L10i” Coating Circulator Pump System with level sensor control
● Conforming to CE Safety Regulation
● Two Oxytech UV lamps (1000W Ea. per inch max. curing) rated for 1,200ft/min max. speed

VPN:
● Remote Internet access to all drive and control systems
● Remote service and diagnostic
● Firmware and software updates

Specifications:

OPTIONAL FEATURES:

OPTIONAL PORTABILITY:
● Castor Wheel Design with Levelers For Safe Portability
● Pin & Puck docking system upgrade for single press location
● MDE- Electrical connection box

OPTIONAL SPOT & PATTERN COATING:
● Integrated DMR Registration Cut Off Control with Scanner Head and Mounting Bar
● Twin Lock Photopolymer sleeve for spot or pattern coating
● Bridge Sleeve required for cutoff less than 21"
● Flexographic Plate Mounting Unit (required for spot coating only)

OPTIONAL CHILLS/TENSION CONTROL:
● Fully integrated hard anodized aluminum web driven Twin Chill Rolls designed for efficient heat dissipation
● Exit pull roll, motor driven equipped w/ HMI touch screen for variable speed tension control

OPTIONAL TRESU COATING SUPPLY CHAMBER:
● Tresu IMW Combi Chambered Doctor Blade System
● Tresu XL5i Specialty Peristaltic Coating Circulator
● Anti-foaming pressure module
● Print and wash

OPTIONAL COMPONENTS & UPGRADES:
● Flow Out vertical structure with manual web up chain device
● Remote HMI operator panel
● Fully Reversible Cylinder Drive Allows for Top Side Or Bottom Side Coating of the web
● Upgrade to motorized sidelay entire coater
● Encoder, encoder mount braket and cable (required if no Electronic signal is available)
● Press interface and integration on New Pressses



Typical Applications:

● UV Varnish for Magazine Covers
● Spot or Continuous Application
● Substrate = Offest Paper, recommended 75gsm minimum coated stock
● Floor mount, after Chills Unit
● Maximum running speed = 1,600ft/min ( Speed is limited by the number & curing power of UV lamps used)




Contact for Prices



Can't find what you're looking for?

Fill up the form below